DIY Christmas Plates - The Make Your Own Zone (2024)

Crafts

Jump to Instructions

Christmas dishes can be such a pretty way to dress up a table around the holidays. But if you’re a frugal, practical sort of person, you may find yourself not wanting to spend a lot of money to buy dishes that are only used once or twice a year. The money-saving solution? Make your own!

DIY Christmas Plates - The Make Your Own Zone (1)

With some clear glass plates from the Dollar Store, some fabric, and some homemade mod podge, you can create your own cute and colorful Christmas plates. A smaller 7.5″ size plate can be filled with holidays treats for gift giving or for setting out plates of snacks and munchies on a buffet table. Plates made in the larger 10.5″ dinner size could be used like chargers to set under a slightly smaller plate for a pretty place setting.

DIY Christmas Plates - The Make Your Own Zone (2)

Now if you have store bought Mod Podge you want to use for this project, that’s fine. But if you don’t, no worries! Once again my homemade mod podge could be used for this project and was a great inexpensive option. You can get the complete instructions for homemade mod podge here – – > How To Make Your Own Mod Podge.

DIY Christmas Plates - The Make Your Own Zone (3)

How to Make Decorative Plates Using Fabric and Mod Podge

The steps for making these plates are pretty simple.

Begin by cutting a piece of fabric slightly larger than your plate. There’s no need to be too precise at this point and no need to worry about wrinkles in the fabric.

DIY Christmas Plates - The Make Your Own Zone (4)

Then, turn the plate upside down (I cover my work surface with newspaper to catch the mod podge drips). Using a sponge applicator brush, cover the surface of the upside down plate with mod podge. Do a generous layer of mod podge, being sure to go all the way to the edges.

DIY Christmas Plates - The Make Your Own Zone (5)

Lay the material over the plate, with the pattern side down. (Be sure the right side is facing down so it will show through the plate).

Smooth the material over the plate, pressing firmly, and picking up the plate as needed to press around the edges.

DIY Christmas Plates - The Make Your Own Zone (6)

Next, turn the plate over and trim the excess material. I like to hold the material up with one hand (because it will still fall away from the edge of the plate a little bit), and then I cut with the other hand, keeping my scissors up against the edge of the plate.

DIY Christmas Plates - The Make Your Own Zone (7)

Then turn the plate back over again and do another layer of mod podge. You want the material to be nice and wet with the mod podge at this point.

DIY Christmas Plates - The Make Your Own Zone (8)

Smooth the fabric again, pressing very firmly over all of the plate, and being sure to smooth all the way to the edges.

DIY Christmas Plates - The Make Your Own Zone (9)

Then let your plate dry. This will take a couple of hours.

And then your Christmas plate is complete! Oh no wait, there’s one more step.

Add cookies. 🙂

DIY Christmas Plates - The Make Your Own Zone (10)

What If Bubbles Happen??

One problem I encountered a couple times while making these plates is that bubble-like lumps in the fabric appeared as the plate dried. After some trial and error, I think the cause for this might have been just not smoothing things down really firmly. It also seemed to help to use a generous layer of mod podge so the fabric was very moist during the smoothing.

If after your plate has dried some bubble lumps have appeared, you can try getting everything wet again with another layer of mod podge and see if you can smooth things out by pressing all over the plate once again very firmly. Then you might want to “babysit” the plate as it dries again and if any lumps are still appearing, try smoothing them out before everything is too dry.

A Frugal Christmas Craft

I always enjoy when a few inexpensive supplies can be used in a craft like this to create something that’s not only pretty but is also practical. Each plate will only cost you a a little more than a dollar if you start with glass plates from the dollar store, and use your homemade mod podge.

DIY Christmas Plates - The Make Your Own Zone (11)

The fabric for these plates will only cost you a buck or two as well. Picking out your fabric is probably the most fun part of this project as there are so many fun patterns and colors to choose from at the fabric store. I used ordinary cotton fabric for all the plates that I made.

If you are making one of the smaller 7.5″ plates, you’ll probably want to purchase at least 1/4 yard of fabric, and about 1/3 yard for a 10.5″ dinner plate. You should be able to make three or four plates from each of those yardage amounts.

DIY Christmas Plates - The Make Your Own Zone (12)

Update: A question I have gotten several times is, “Are these plates washable?” What I do is just give them a quick washing on the front side of the plate with a damp sponge or cloth which works fine. However, I would not recommend putting them in the dishwasher or immersing them in a sink full of water. Just stick with a quick and light hand washing on the glass front side of the plate.

Here’s the complete printable instructions:

DIY Christmas Plates - The Make Your Own Zone (13)

Print Pin

Make your own pretty plates for dressing up your table or for giving as gifts with this fun craft that uses fabric and mod podge.

Author: Beverly

Materials:

  • Glass Plate
  • Mod Podge
  • Sponge Applicator Brush
  • A piece of cotton fabric slightly larger than your plate

Instructions:

  • Begin by putting something protective over your work surface, such as a piece of newspaper. Then lay your glass plate upside down, and cover with a generous coat of mod podge.

  • Lay the fabric on the plate, with the pattern side facing down (so that it will show through the glass plate).

  • Smooth the material over the plate, pressing firmly, and picking up the plate as needed to press around the edges.

  • Next, turn the plate over and trim the excess material. I like to hold the material up with one hand (because it will still fall away from the edge of the plate a little bit), and then I cut with the other hand, keeping my scissors up against the edge of the plate.

  • Then turn the plate upside down again and do another layer of mod podge. You want the material to be nice and wet with the mod podge at this point.

  • Smooth the fabric again, pressing very firmly over all of the plate, and being sure to smooth all the way to the edges.

  • Let the plate dry, which should take about 2 hours.

Notes:

If any “bubble lumps” appear in the fabric after drying, try getting everything wet again with another coat of mod podge and try smoothing again, pressing very firmly.

If making a small 7.5″ dessert size plate, you will need to purchase 1/4 yard of fabric.

If making a larger 10.5″ dinner size plate, you will want to purchase 1/3 yard of fabric.

Related Reading:

  • DIY Mod Podge String Christmas Trees
  • Knit Wine Bottle Santa Hats
  • My Favorite Cut-Out Cookie Recipe

Share

Pin35.3K

Email

Share

DIY Christmas Plates - The Make Your Own Zone (14)

Need a few more bright ideas?
Sign up for the monthly email newsletter to learn about my latest content and tips for frugal homemade living.

DIY Christmas Plates - The Make Your Own Zone (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Neely Ledner

Last Updated:

Views: 6374

Rating: 4.1 / 5 (62 voted)

Reviews: 85% of readers found this page helpful

Author information

Name: Neely Ledner

Birthday: 1998-06-09

Address: 443 Barrows Terrace, New Jodyberg, CO 57462-5329

Phone: +2433516856029

Job: Central Legal Facilitator

Hobby: Backpacking, Jogging, Magic, Driving, Macrame, Embroidery, Foraging

Introduction: My name is Neely Ledner, I am a bright, determined, beautiful, adventurous, adventurous, spotless, calm person who loves writing and wants to share my knowledge and understanding with you.